Flat iron hoop machine also known as: hoop molding machine, CNC hoop molding machine, flat material hoop machine, automatic hoop molding machine
Hogi Flat iron hoop forming machine is a kind of metal forming equipment for processing fasteners, which can straighten, punch, steel stamp, bend, cut off and complete the specific shape of flat iron or stainless steel with different widths and thicknesses. Put the flat material from the left into the machine’s inlet, through the operation, in the straightening structure to complete the flat material straightening task. At this time the hydraulic oil station motor runs, delivering power to the hydraulic structure, the hydraulic system (machine tool, pressure head, pressure plate, molds, etc. collectively referred to as the hydraulic system) in the power drive to complete the punching, steel stamping and cutting off (in the steel stamping after the hoop in the bending structure to complete the bending of the molding, the telescopic motor back to the hydraulic system, to complete the cutting off task).
1, The mold correspondence and installation
mold is flat iron hoop machine use, important indispensable, such as hoop punching position is different need to use different punching molds, such as hoop graphic smaller need to use a specific bending mold, such as cut off the end of the hoop is rounded, the need for a specific special arc cutter mold. If the hoop needs steel printing, you need to install steel printing function and steel printing mold (different letters of steel printing, different steel printing mold).
2, CNC touch screen system
hoop graphic processing, can not be separated from the CNC touch screen parameters of the graphic settings, you need to enter the processing of the hoop inside the touch screen “program”, replace the hoop corresponding to the mold, start the processing task.
3, flat iron discharge rack configuration
flat iron hoop molding machine needs to be configured with a discharge rack to use, it is not like CNC rebar bending machine, configure or not configure the steel rotary discharge rack can be processed hoop graphic, flat iron and steel is different.
In short, flat iron hoop forming machine operation is inseparable from the hoop corresponding to the mold, CNC touch screen parameter settings, flat iron discharge frame supporting. Flat iron hoop forming machine is divided into different models, such as 50-5 type and 100-8 type, processing flat material with different widths and thicknesses, a single head, a double head, according to the needs of the construction drawings, buy the right model can be!
Medium-sized hoop forming machine 20-50 and large-sized hoop forming machine 20-150 are single-head and double-head hoop forming machines in that order, with different structures and configurations, according to the construction drawings, you can choose the suitable model.
Hoop is a member that holds or clamps one material to another. It belongs to fasteners. Flat iron hoop machine also known as: hoop forming machine, CNC hoop forming machine, flat material hoop machine, automatic hoop forming machine, hoop molding machine for the hardware industry, transportation hoop, electric power hoop, photovoltaic hoop, seismic bracket hoop, hoop molding machine to support the production needs of various types of hoops.
HOGI Automatic flat iron hoop forming machine can be used under the operation of 1 person, it can realize the whole process from adding materials to the output of finished hoop products. Enterprises introduce the use of this machine, you can improve the productivity of the enterprise hoop, get rid of the low capacity and efficiency of manual production, for the hoop production enterprises to improve the economic benefits. Various types of flat iron hoop machine can automatically carry out the hoop forming, simple and rapid, can realize rapid mass production, but also can save raw materials, realize fast and efficient processing production. The quality of the products is also relatively stable, with good stability and long service life.
Automatic flat iron hoop machine 50-5 and 100-8 type, according to the drawing processing requirements, choose the appropriate model can be processed, processing of different shapes of hoops, punching position is different, etc. need to configure the corresponding mold. The hoop machine has punching molds, steel stamp molds, arc cutter molds, bending molds and so on.
Hogi Automatic flat iron hoop machine for workers do not have high technical requirements, the use and operation is also particularly convenient and simple, save time and effort, in this batch production, can quickly complete the straightening and punching molding cut off, CNC operation, do not need to manually carry out calculations, resulting in processing costs are relatively low. Especially the process of steel stamping, previously are stamping machine stamping time-consuming and laborious, with this hoop machine automated process processing, it is really great. Through the use of fully automated flat iron hoop forming machine processing out of the product, can be a one-time molding configuration of the hoop, do not need to carry out additional processing, greatly saving manpower and material resources, saving the cost of enterprise production. This type of hoop machine can also process more difficult products and more complex shape of the hoop products, automated production, greatly improving the effectiveness of the enterprise. Therefore, in the process of modern production, the use of flat iron clamping machine can quickly realize the mass production, one person can handle a machine! A machine is equivalent to the workload of 10-15 workers, greatly improving the efficiency of the work
Flat iron hoop plays an important role in many fields by virtue of its solidity, adjustability and corrosion resistance, etc. The following are the main areas of application and specific scenarios described:
I. Power Engineering Field
Transmission Line Construction
It is used to fix the cross-arms, insulators and cables on poles and towers to ensure the stability of transmission lines. For example, in high-voltage transmission lines, flat iron hoop can fix the cross-arms on the poles and towers to prevent the cross-arms from being displaced due to wind or other external forces, and ensure the safety of power transmission.
Substation equipment installation
fixes transformers, distribution cabinets and other equipment in the substation, or is used to support and fix cable bridges, so that cables are laid in an orderly manner, avoiding line failures due to equipment vibration or external influences.
Second, the field of communication engineering
Communication base station building
Fixing antenna, feeder and fiber optic cable on communication towers or poles to ensure the stability of signal transmission equipment. For example, the antenna is hooped on the tower support to prevent the antenna from tilting due to wind and other weather factors, which affects the signal coverage.
Fiber optic cable laying support
In overhead fiber optic cable laying, it is used to fix the hooks of fiber optic cables, so that the fiber optic cables are evenly distributed along the poles or towers, and to avoid the cables from sagging or breaking.
Third, building and steel structure engineering
Building support and fixing
Fixing the bracket of air-conditioner outside machine and solar water heater bracket on the external wall of the building to prevent the equipment from falling down;
Connecting and fixing steel beams, steel columns and other components in the steel structure building to enhance the integrality of the structure, e.g., fixing the purlins of the roof of the steel structure by using flat iron hoops.
Piping installation
In building water supply and drainage and fire fighting piping systems, fixing horizontal or vertical piping to prevent piping vibration or displacement. For example, in the installation of risers in high-rise buildings, the pipes are fixed on the wall or bracket with flat iron hoops at regular intervals.
Fourth, municipal and traffic engineering
Municipal facilities fixed
Fixing the base or middle section of street light poles and traffic signal poles to ensure that the facilities are stable in the outdoor environment;
Used in urban comprehensive pipeline corridors to fix the gas, water supply, drainage and other pipelines, to facilitate the unified management and maintenance of pipelines in the corridor.
Bridge engineering
Fixing cables, drainage pipes or support structures of anti-collision guardrails on bridges, such as fixing drainage pipes on the side of bridges with flat iron hoops to prevent the pipes from falling off due to vehicle vibration.
V. Industrial and Equipment Manufacturing
Industrial Piping Systems
Fixing pipe supports or compensators in industrial pipelines such as steam pipelines and chemical pipelines in factories to avoid displacement of pipelines due to thermal expansion and contraction and at the same time to reduce vibration damage to pipelines.
Mechanical Equipment Installation
Fixing parts or shells of large mechanical equipment, such as in fans, compressors and other equipment, using flat iron hoops to fix the shell cover or internal piping, to ensure the stability of the equipment during operation.
Sixth, agriculture and water conservancy engineering
Agricultural facilities construction
Fixing the skeleton of greenhouse greenhouses, pipelines of irrigation systems, or fixing poles (for agricultural electricity or IoT equipment) in farmland, such as using flat iron hoop to connect the steel pipe supports of greenhouses into a whole, to enhance the wind resistance of greenhouses.
Water conservancy engineering
In the installation of gates or pumps in reservoirs and canals, fixing the support structure of the equipment, or used to fix water conservancy pipelines (e.g., irrigation water pipelines), to ensure that water conservancy facilities remain stable under the impact of water flow.
VII. Other Application Scenarios
Environmental protection engineering: fixing pipelines, aeration devices and other equipment in sewage treatment plants;
Ships and marine engineering: fixing pipelines and cables on the decks or cabins of ships, adapting to the humid and vibrating environment at sea;
Temporary facilities construction: such as outdoor billboards, the fixing of temporary brackets, which can be quickly mounted and dismounted according to the demand.
The application of flat iron hoop covers almost all kinds of engineering fields that need “fixing, connecting and supporting”, and its flexibility and customization make it adapt to the specific needs of different scenarios, and it is a common basic component in industrial and civil fields.
Flat Iron Hoop Machine Width, Thickness and Shape
Firstly, according to the width, thickness and shape of flat material, choose the corresponding model. Generally 50 mm wide, 5 thick with 50 type hoop machine, if there are shaped hoop shape, can be customized three cylinder, four cylinder, five cylinder and six cylinder models. If your flat material is 100mm wide and 10 thick, we recommend you to use 100 type clamping machine, the standard 100 type clamping machine is three cylinders configuration, if you have special shape of clamping, you can customize four, five or six cylinders clamping machine. Here is HOGI machinery, a fully automatic CNC flat iron hoop machine source factory, like and need this machine friends, you can contact # HOGICNCMACHINE.
Flat Iron Hoop Machine Shape Mould
Secondly, if the hoops are shaped different shapes, such as a finished hoop with round punching, elliptical punching, steel stamping, arc cutting, pressure groove or cutter concave into a part of the, etc., it is necessary to Customized punching molds, flat hole molds, steel stamp molds, arc cut off, pressure groove molds and cutter molds and so on. Specific need to send the user hoop samples or drawings, docking can be customized molds.
Flat iron hoop machine discharge frame
Finally, it should be noted that any material of flat iron or stainless steel, in the straightening punching, steel stamp bending and cutting, you need to configure a discharge frame, the whole roll of flat material will be placed on the discharge frame, the discharge frame is 1 m long, 1 m wide, 1.6 m high center axis hole 56 cm, start the flat iron hoop, flat material will be from the discharge frame a steady stream of material to the hoop machine delivery, after the machine processing After the machine processing, one by one, the corresponding hoop graphic is completed.
1, the general flat iron hoop molding machine is randomly configured with a standard cutter, if the hoop cutter head for the arc shape, you need to customize the arc mold.
2, if the punching position is different, you need to customize the punching mold, you need to provide users with processing drawings or samples, according to these we can make a suitable mold.
3、According to the bending shape, if the processing of shaped hoops or smaller hoops, you need to customize the bending mold.
4, 50-type and 100-type hoop machine combined with straightening, punching, bending and cutting function, if the hoop needs to be steel stamped, the machine needs to add the steel stamp function and steel stamp mold (different letters of the hoop using the corresponding mold can be).
Manual, electric flat iron discharge rack
flat iron hoop machine is not like CNC rebar bending machine, configuration is not configured discharge rack can be used, even if the whole disk of steel placed on the ground is not relevant, but the flat material is different, if there is no discharge rack, the flat iron original material on the ground is not able to give the machine to transport materials.
Flat iron hoop machine: also known as hoop machine, flat iron hoop molding machine, CNC hoop machine, automatic flat iron hoop machine, straightening punching cutting machine, hoop molding machine. Applicable to traffic signs, hardware products, electric power hoop, photovoltaic hoop, seismic stents and other industries, one automated processing molds in the industry is popular, instead of manual labor, has become a popular processing machinery.
